Aluminum Isopropoxide or Aluminium Isopropoxide SDS MSDS of Manufacturers & Exporters
Please cvisit Aluminum Isopropoxide or Aluminium Isopropoxide USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals
Aluminum Isopropoxide or Aluminium Isopropoxide CAS Number 555-31-7
Aluminium Isopropoxide or Aluminium Isopropylate SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet 22-July-202
SECTION 1. PRODUCT IDENTIFICATION
Product Name & Other Names: Aluminium isopropoxide or Aluminium isopropylate or Aluminium tri(2-propanolate).
CAS Number: 555-31-7
EINECS EC Number: 209-090-8
Molecular Formula: C9H21AlO3 or Al[OCH(CH3)2]3
Molecular Weight: 204.24
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Supplier: As per the letterhead.
SECTION 2. HAZARDS IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Flammable solids (Category 1), H228
Serious Eye Damage/Eye Irritation (Category 2), H319
Specific target organ toxicity - single exposure (Category 2), H335.
Labeling according GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements
Flammable Solids |
GHS Label Elements
Irritant |
Signal Words: Danger
Hazard statements:
H228: Flammable solid.
H319: Causes serious eye irritation
H335: May cause respiratory irritation.
Precautionary statements:
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P240: Ground/bond container and receiving equipment.
P241: Use explosion-proof electrical/ventilating/light/…/equipment.
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P302+P352: IF ON SKIN: Wash with soap and water.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P370+378: In case of fire: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide for extinction.
Classification according to European Directive 67/548/EEC as amended:
Hazard symbol(s)
F Extremely Flammable
Xi Irritating
R-phrase(s)
R7 May cause fire.
R36/37 Irritating to eyes and respiratory system.
SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS
Product Name & Other Names: Aluminium isopropoxide or Aluminium isopropylate or Aluminium tri(2-propanolate).
CAS Number: 555-31-7
EINECS EC Number: 209-090-8
SECTION 4. FIRST AID MEASURES
Always seek medical attention after first aid measures are provided.
Eye Contact: Do not allow victim to rub eye (s). Let the eye (s) water naturally for a few minutes. If particle/dust does not dislodge, flush with lukewarm, gently flowing water for 5 minutes or until particle/dust is removed, while holding eyelid (s) open. If irritation persists, obtain medical attention. DO NOT attempt to manually remove anything stuck to the eye.
Skin Contact: Remove contaminated clothing, shoes, and leather goods (e.g. watchbands, belts). Quickly and gently blot or brush away excess chemical. Wash gently and thoroughly with lukewarm gently flowing water and non-abrasive soap for 5 minutes. If irritation persists, repeat flushing. Obtain medical advice. Completely decontaminate clothing, shoes and leather goods before reuse or else discard.
Inhalation: If symptoms are experienced, remove source of contamination or move victim to fresh air. Obtain medical advice.
Ingestion: Never give anything by mouth if victim is rapidly losing consciousness or is unconscious or convulsing. Have victim rinse mouth thoroughly with water.
SECTION 5. FIRE FIGHTING MEASURES
Fire and Explosion Hazards: Flammable Solids.
Extinguishing Media: Use means of extinction appropriate for the surrounding fire conditions such as water spray, carbon dioxide, dry chemical, or foam.
Fire Fighting: Apart from oxides of carbon. toxic fumes may result from combustion. As with any fire, fire fighters should be fully trained and wear full protective clothing including an approved, self-contained breathing apparatus which supplies a positive air pressure within a full-face piece mask. Do not use water directly on material. Do not allow water run-off to enter sewers or watercourses. Use water spray to cool unopened containers.
Special Information In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law. Use spark-proof tools and explosion-proof equipment.
SECTION 7. HANDLING AND STORAGE
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Keep away from sources of ignition - No smoking. Take measures to prevent the build-up of electrostatic charge. It is good practice to keep the container closed when not in use. Avoid generating dust and the release of dust into the workplace. Good housekeeping is important to prevent accumulations of dust. Always practice good personal hygiene. Refrain from eating, drinking, or smoking in work areas. Protect from moisture. Store locked up. Store away from incompatible materials such as oxidizing agents and acids. Moisture-sensitive, Air-sensitive.
SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Control Parameters: ACGIH TLV: 1mg/m3 TWA.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: It is colorless or white crystals, granules or powder.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: around 1.035
Freezing/Melting Point/Range: 128C to 133C
Initial boiling point and boiling range: Not available.
Flash point: 16C
Auto-ignition temperature: No information found.
Decomposition temperature: No information found.
Upper/lower flammability or explosive limits: No information found.
Vapor pressure: No information found.
Vapor density: No information found.
Evaporation rate: No information found.
Flammability (solid, gas): No information found.
Partition coefficient: n-octanol/water: No information found.
Solubility in Water: Decomposes in water.
Viscosity: No information found.
Molecular Formula: C9H21AlO3 or Al[OCH(CH3)2]3
Molecular Weight: 204.24
SECTION 10. STABILITY AND REACTIVITY
Stability and Reactivity: It is stable and not considered reactive under normal temperatures and pressures. Hazardous polymerization or runaway reactions will not occur.
Incompatibilities: Strong Oxidizing agents, Acids, Water.
Hazardous Decomposition Products: High temperature operations will generate Carbon oxides and Aluminum oxide and Fumes.
SECTION 11. TOXICOLOGICAL INFORMATION
Acute Toxicity Oral: Rat: LD50: (mg/kg): 11300; LD50 Oral - Mouse - 1.310 mg/kg.
Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Mutagenic Effects: No information found.
Reproductive Effects: No information found.
Developmental Effects: No information found.
Teratogenicity: No information found.
SECTION 12. ECOLOGICAL INFORMATION
Eco toxicological data: Reacts with water so no ecotoxicity data for the substance is available.
Results of PBT and vPvB assessment: No information available.
Persistence and Degradability: Persistence is unlikely based on information available.
Bioaccumulation/ Accumulation: No information available.
Mobility: Is not likely mobile in the environment.
SECTION 13. DISPOSAL CONSIDERATIONS
Do not wash the material down drain. Put uncontaminated material back into the process if possible. Place contaminated material in suitable, labeled containers for disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.
SECTION 14. TRANSPORT INFORMATION
DOT USA ADR/RID Europe:
UN Number: UN3181
UN proper shipping name: METAL SALTS OF ORGANIC COMPOUNDS, FLAMMABLE, N.O.S.
Transport hazard class(es): 4.1; Packaging group: II
IATA:
UN Number: UN3181
UN proper shipping name: METAL SALTS OF ORGANIC COMPOUNDS, FLAMMABLE, N.O.S.
Transport hazard class(es): 4.1; Packaging group: II
IMDG:
UN Number: UN3181
UN proper shipping name: METAL SALTS OF ORGANIC COMPOUNDS, FLAMMABLE, N.O.S.
Transport hazard class(es): 4.1; Packaging group: II
SECTION 15. REGULATORY INFORMATION
USA Regulations:
SARA 311/312 Hazards: See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
SECTION 16 - ADDITIONAL INFORMATION
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
************************** Specifications of Aluminum Isopropoxide or Aluminium Isopropoxide GMP BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers |
