Benzododecinium Bromide SDS MSDS of Manufacturers & Exporters
Please visit Benzododecinium Bromide USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals
Benzododecinium Bromide CAS Number 7281-04-1
Benzododecinium bromide or Dimethyldodecylbenzylammonium bromide or Benzyldodecyldimethylammonium bromide or Benzyldimethyldodecylammonium bromide SDS Safety Data Sheet or MSDS, Material Safety Data Sheet 10-Aug-22
1. Product Identification
Product Name & Other Names:Benzododecinium bromide or Dimethyldodecylbenzylammonium bromide or Benzyldodecyldimethylammonium bromide or Benzyldimethyldodecylammonium bromide.
CAS No.: 7281-04-1
EINICS EC-No.: 230-698-4
Molecular Weight: 116.07g/mol
Chemical Formula: C21H38NBr or CH3(CH2)11N(Br)(CH3)2CH2C6H5
Molecular weight: 384.44 g/mol
Suppliers: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 3), H301
Skin irritation (Category 2), H315
Eye irritation (Category 2), H319
Specific target organ toxicity - single exposure (Category 3), Respiratory system, H335
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Danger |
Signal Words: Danger
Hazard Statements:
H301: Toxic if swallowed
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary Statements
P202: Do not handle until all safety precautions have been read and understood.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash ... thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P280-Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310+330: IF SWALLOWED: Rinse mouth and immediately call a POISON CENTER or doctor/physician.
P303 + P361 + P352 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Wash with plenty of soap and water.
P304 + P341 + P311 IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P314: Get Medical advice/attention if you feel unwell.
P337+P313 If eye irritation persists: Get medical advice/ attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Benzododecinium bromide or Dimethyldodecylbenzylammonium bromide or Benzyldodecyldimethylammonium bromide or Benzyldimethyldodecylammonium bromide.
CAS No.: 7281-04-1
EINICS EC-No.: 230-698-4
Composition: Minimum 96.0%
4. First Aid Measures
Always seek medical advice after the first aid treatment.
If inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact: off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed: Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
5. Fire Fighting Measures
Extinguishing media: Suitable extinguishing media. Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture: Carbon oxides, Nitrogen oxides (NOx), Hydrogen bromide gas Combustible.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Wear respiratory protection. Avoid dust formation. Avoid breathing vapors, mist or gas.
Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up: Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.
7. Handling and Storage
Precautions for safe handling: Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities: container tightly closed in a dry and well-ventilated place. Store in cool place.
8. Exposure Controls/Personal Protection
Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies. There is a blanket recommendation of 10 mg/m3 for inspirable dusts or mists when limits have not otherwise been established.
Appropriate engineering controls: Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.
Personal protective equipment
Eye/face protection: Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
Body Protection: Complete suit protecting against chemicals.
Respiratory protection: Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering controls.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: It occurs as white to off-white powder
Odor: Not available
Odor threshold: Not available.
pH: Not available
Melting Point: 47C to 55C literature.
Initial boiling point and boiling range: Not available.
Flash point: 110C - closed cup
Auto-ignition temperature: No information found.
Decomposition temperature: No information found.
Upper/lower flammability or explosive limits: No information found.
Vapor pressure: No information found.
Vapor density: No information found.
Evaporation rate: No information found.
Flammability (solid, gas): No information found.
Partition coefficient: n-octanol/water: No information found.
Solubility: Colorless to faint yellow
Viscosity: No information found.
Molecular Weight: 384.44
Chemical Formula: C21H38BrN
10. Stability and Reactivity
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions: No data available
Conditions to avoid: No information found.
Incompatible materials:Oxidizing agents
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides, Nitrogen
oxides (NOx), Hydrogen bromide gas
Other decomposition products - No information found.
11. Toxicological Information
Acute toxicity: LD50 Oral - Rat - 230 mg/kg
Skin corrosion/irritation: No information found.
Germ cell mutagenicity: No information found.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC NTP or OSHA.
Reproductive toxicity: No information found.
12. Ecological Information Toxicity
Persistence and degradability: No information found.
Bioaccumulative potential: No information found.
Mobility in soil: No information found.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. Disposal Considerations
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
14. Transport Information
Land Transport DOT USA, TDG Canada & ADR/RID Europe:
UN number 2811
UN proper shipping name: Toxic solid, organic, n.o.s. (Benzododecinium Bromide)
Transport hazard class 6.1; Packaging group III.
Sea Transport IMDG/IMO:
UN number 2811
UN proper shipping name: Toxic solid, organic, n.o.s. (Benzododecinium Bromide)
Transport hazard class 6.1; Packaging group III.
Air Transport IATA/ICAO:
UN number 2811
UN proper shipping name: Toxic solid, organic, n.o.s. (Benzododecinium Bromide)
Transport hazard class 6.1; Packaging group III.
15. Regulatory Information
USA:
California Proposition 65: Not listed.
SARA 311/312 Hazards: See section 2.
16. Other Information
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user.
Specifications of Benzododecinium Bromide BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers |
