Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Ammonium Bromide ---- Ammonium Bicarbonate ---- Ammonium Carbonate ---- Ammonium Chloride ---- Ammonium Phosphate Monobasic ---- Ammonium Phosphate Dibasic ---- Ammonium Persulfate ---- Ammonium Sulfate ---- Bismuth Citrate ---- Bismuth Subcarbonate ---- Bismuth Subcitrate Potassium ---- Bismuth Subgallate ---- Heavy Bismuth Subnitrate ---- Bismuth Subsalicylate ---- Lithium Carbonate ---- Lithium Citrate ---- Lithium Hydroxide Manufacturer & Exporter

Bismuth Subgallate SDS MSDS of Manufacturers & Exporters Please visit Bismuth Subgallate USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Bismuth Subgallate CAS Number 99-26-3 or 149-91-7 Bismuth Subgallate SDS, Safety Data Sheet MSDS Sheet, Material Safety Data Sheet 01-August-22 1. Product Identification Product Name & Other Names: Bismuth Subgallate, 2,7-Dihydroxy-1,3,2-benzodioxabismole-5-carboxylic acid, Bismuth(III) gallate basic hydrate, Dermatol. CAS No.: 99-26-3 or 149-91-7 EINECS EC Number: 202-742-2 Molecular Weight: 394.09 Chemical Formula: C7H5BiO6 Relevant uses and uses advised against (if any): Laboratory and Industrial use only. Supplier: As per letterhead. 2: Hazards Identification GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Classification according to Regulation (EC) No 1272/2008 Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. This substance is not classified as dangerous according to Directive 67/548/EEC. Labeling according to GHS & Regulation (EC) No 1272/2008 GHS Label Elements NONE Signal Word: None Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapors/spray. P262: Do not get in eyes, on skin, or on clothing. P281: Use personal protective equipment as required. P302+P352 - IF ON SKIN: Wash with plenty of soap and water. P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. 3. Composition/Information on Ingredients Product Name & Other Names: Bismuth Subgallate, 2,7-Dihydroxy-1,3,2-benzodioxabismole-5-carboxylic acid, Bismuth(III) gallate basic hydrate, Dermatol. CAS No.: 99-26-3 or 149-91-7 EINECS EC Number: 202-742-2 4. First Aid Measures Always seek medical advice after the first aid treatment. Skin: Wash exposed area with soap and water. Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person. 5. Fire Fighting Measures Fire: It is not considered to be a fire hazard. Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Use means suitable for extinguishing surrounding fire. Extinguishing Media Not recommended: None specified. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. 6. Accidental Release Measures Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Do not approach facing the wind. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. 7. Handling and Storage Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents. 8. Exposure Controls/Personal Protection Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. Exposure Limits: No specific OES assigned, however for dusts of any kind, ensure LTEL (8-hour TWA ref. period) level does not exceed 10 mg.m3 for total inhalable dust or 4 mg.m3 for respirable dust (or) as recommended in current edition of EH40. Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling. 9. Physical and Chemical Properties Appearance: It is fine, light yellow powder. Odor: Odorless. Odor threshold: Not available. pH: Not available. Relative density: 1.1 Melting point/freezing point: Not available. Initial boiling point and boiling range: Not available. Flash point: Not available. Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility: Insoluble in water. Viscosity: No information found. Molecular Weight: 394.09 Chemical Formula: C7H5BiO6 10. Stability and Reactivity Stability: It is stable under ordinary conditions of use and storage. Hazardous Decomposition Products: When heated to decomposition, emits bismuth oxide, fumes and liberates carbon dioxide. Hazardous Polymerization: Will not occur. Incompatibilities: Oxidizing agents. Conditions to Avoid: Heat, incompatibles. 11. Toxicological Information Toxicity to Animals: No information found. Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP. Teratogenic Effects: No information found. Mutagenic Effects: No information found. Developmental Toxicity: No information found. Reproductive Effects: No information found. 12. Ecological Information Toxicity to fish: No information found. Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. 13. Disposal Considerations Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. 14. Transport Information Land Transport DOT USA, TDG Canada and ADR/RID Europe: Not controlled. Sea Transport IMO/IMDG: Not controlled. Air Transport ICAO/IATA: Not controlled. 15. Regulatory Information USA Regulations: SARA 311/312 Hazards: No SARA Hazards. California Proposition 65: Not listed. 16. Other Information DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of Bismuth Subgallate BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Bismuth Subgallate IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Bismuth Subgallate