Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Acetic Acid Glacial & Solution ---- Acetone ---- Adipic Acid ---- Alginic Acid ---- Arsanilic Acid ---- Ascorbic Acid ---- Aspartic Acid ---- ATMP ---- Benzoic Acid ---- Boric Acid ---- Butyric Acid ---- Caprylic Acid ---- Cinnamic Aldehyde ---- Citric Acid ---- DETA or DTPMP ---- Edetic Acid EDTA ---- Formaldehyde Solution ---- Fumaric Acid ---- Glutaraldehyde ---- Lactobionic Acid ---- Maleic Acid ---- Malic Acid ---- Oleic Acid ---- Propionic Acid ---- Selenious Acid Manufacturer & Exporter

Cinnamic Aldehyde or Cinnamaldehyde SDS MSDS of Manufacturers & Exporters Please visit Cinnamic Aldehyde or Cinnamaldehyde USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Cinnamic Aldehyde or Cinnamaldehyde CAS Number 104-55-2 Cinnamic Aldehyde or Cinnamaldehyde SDS SAFETY DATA SHEET MSDS, Material Safety Data Sheet 14-Aug-22 1. PRODUCT IDENTIFICATION Product Name & Other Names: Cinnamic Aldehyde or Cinnamaldehyde or 3-PHENYL-2-PROPENAL. CAS Number: 104-55-2 EINECS EC Number: 203-213-9 Molecular Weight: 132.16 Molecular Formula: C9H8O Relevant uses and uses advised against (if any): Laboratory and Industrial Manufacturing. SUPPLIER: As per letterhead. 2. HAZARDS IDENTIFICATION GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Classification according to Regulation (EC) No 1272/2008 Skin corrosion/irritation Category 2, H315 Sensitization, Skin Category 1, H317 Serious eye damage/eye irritation Category 2A, H319 Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3, H335 Hazardous to the aquatic environment, acute hazard Category 2, H401 Labeling according to Regulation (EC) No 1272/2008 GHS Label Elements Irritant Signal Words: Warning Hazard Statements: H315: Causes skin irritation. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H335: May cause respiratory irritation. H401: Toxic to aquatic life. Precautionary Statements: P261: Avoid breathing dust/fume/gas/mist/vapors/spray. P264: Wash --- thoroughly after handling. P272: Contaminated work clothing should not be allowed out of the workplace. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection. P302+352: IF ON SKIN: Wash with soap and water. P332+313: If skin irritation occurs: Get medical advice/attention. P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing. P333+313: If skin irritation or a rash occurs: Get medical advice/attention. P337+313: If eye irritation persists get medical advice/attention. 3. COMPOSITION / INFORMATION ON INGREDIENTS Product Name & Other Names: Cinnamic Aldehyde or Cinnamaldehyde or 3-Phenyl-2-Propenal. CAS Number: 104-55-2 EINECS EC Number: 203-213-9 FEMA: 2286 4. FIRST-AID MEASURES Always seek medical attention after first aid measures are provided. Eye Contact: Rinse immediately with plenty of water for 10 minutes at least. Contact a physician if symptoms persist. Skin Contact: Wash thoroughly with soap and water; flush with plenty of water. Take off spoilt clothes. Contact physician if symptoms persist. Ingestion: Wash the mouth with water; seek medical advice immediately. Inhalation: Remove from exposure site to fresh air and keep at rest. Obtain medical advice. 5. FIRE-FIGHTING MEASURES Extinguishing Media Recommended: CO2, foam, dry chemicals. Non-Recommended: Do not use direct water jet on burning material. Extinguishing Procedure: Closed containers may build up pressure at elevated temperatures. If possible, containers should be cooled with a water spray. Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep up and remove to an approved disposal container. Avoid open flames or other sources of ignition. 7. HANDLING AND STORAGE Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong acids, alkali, or oxidizing agents. Fire Protection: Keep away from ignition sources and naked flame. 8. EXPOSURE CONTROL Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies. Respiratory Protection: Avoid to breath directly on the product. Apply local ventilations when appropriate. Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear Mobile Pale Yellow Liquid. Odor: Strong, Sweet, Balsamic, Cinnamon bark Odor threshold: Not available. pH: Not available. Relative density: Not available. Flash Point (C): 71 Boiling Point (C): 251 Melting Point (C): -8 Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility(ies): No information found. Viscosity: No information found. Molecular Weight: 132.16 Molecular Formula: C9H8O 10. STABILITY AND REACTIVITY Reactivity: It presents no significant reactivity hazards, by itself or in contact with water. Avoid contact with strong acids, alkali, or oxidizing agents. Decomposition: Carbon monoxide and unidentified organic compounds may be formed during combustion. 11. TOXICOLOGICAL INFORMATION LD 50 ORAL/RAT (mg/Kg): 2220 LD 50 DERMAL/RABBIT (mg/Kg): > 2000 Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP. Mutagenic Effects: No information found. Developmental Toxicity: No information found. Reproductive Effects: No information found. 12. ECOLOGICAL INFORMATION Toxicity to fish: LC50 Danio rerio (zebra fish) - 3 mg/l - 96 h Biodegradability: Readily biodegradable. Mobility: No information found. Results of PBT and vPvB assessment: No information found. Precautions: Prevent contamination of soil, ground, and surface water. 13. DISPOSAL CONSIDERATIONS In accordance with local environmental laws. Avoid disposing into drainage systems and into the environment. 14. TRANSPORT REGULATIONS Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled. Sea Transport IMDG/IMO: Not controlled. Air Transport IATA/ICAO: Not controlled. 15. REGULATORY INFORMATION USA: SARA 311/312 Hazards: See section 2. California Prop 65 Components: Not listed to cause cancer, birth defects, or any other reproductive harm. 16 - ADDITIONAL INFORMATION DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of Cinnamic Aldehyde or Cinnamaldehyde BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Cinnamic Aldehyde or Cinnamaldehyde IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Cinnamic Aldehyde or Cinnamaldehyde