Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Cinnamic Aldehyde ---- Acetic Acid Glacial & Solution ---- Boric Acid ---- Erythorbic Acid ---- Formaldehyde Solution ---- Formic Acid ---- Fumaric Acid ---- Gallic Acid ---- Gluconic Acid ---- Glutaraldehyde ---- Glycerophosphoric Acid ---- HEDP ---- Hyaluronic Acid ---- Lactic Acid ---- Lactobionic Acid ---- Lauric Acid or Dodecanoic Acid ---- Maleic Acid ---- Malic Acid ---- Maltobionic Acid ---- Myristic Acid ---- Oleic Acid ---- Orotic Acid ---- Peracetic Acid ---- Propionic Acid ---- Selenious Acid Manufacturer & Exporter

Formaldehyde Solution Specifications of Commercial Pure & BP Ph Eur USP Grade Manufacturers & Exporters Please visit Formaldehyde Solution USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Formaldehyde Solution CAS Number 50-00-0 Specifications of Formaldehyde Solution USP Grade CH2O 30.03 Formaldehyde CAS 50-00-0. Formaldehyde Solution in bulk containers contains not less than 37.0 percent, by weight, of formaldehyde (CH2O), with methanol added to prevent polymerization. Formaldehyde Solution in small containers (4 liters or less) contains not less than 36.5 percent, by weight, of formaldehyde (CH2O), with methanol present to prevent polymerization. Packaging and storage: Preserve in tight containers, and preferably store at a temperature not below 15C. Identification: A: Dilute 2 mL with 10 mL of water in a test tube, and add 1 mL of silver-ammonia-nitrate: metallic silver is produced either in the form of a finely divided, gray precipitate, or as a bright, metallic mirror on the sides of the test tube. B: Add 2 drops to 5 mL of sulfuric acid in which about 20 mg of salicylic acid has been dissolved, and warm the liquid very gently: a permanent, deep-red color appears. Acidity: Measure 20.0 mL into a flask containing 20 mL of water, add 2 drops of bromothymol blue and titrate with 0.1 N sodium hydroxide: not more than 10.0 mL of 0.1 N sodium hydroxide is consumed. Formaldehyde Solution BP Grade Specifications Formalin Formaldehyde Solution (35 per cent), Ph Eur CH2O -- 30.03 -- CAS 50-00-0 Action and use: When suitably diluted, used in the treatment of warts. DEFINITION Content: 34.5 per cent m/m to 38.0 per cent m/m of formaldehyde (CH2O; Mr 30.03). It contains methanol as stabiliser. CHARACTERS Appearance: Clear, colourless liquid. Solubility: Miscible with water and with ethanol (96 per cent). It may be cloudy after storage. IDENTIFICATION A. Dilute 1 ml of solution S (see Tests) to 10 ml with water. To 0.05 ml of the solution add 1 ml of a 15 g/l solution of chromotropic acid sodium salt, 2 ml of water and 8 ml of sulphuric acid. A violet-blue or violet-red colour develops within 5 min. B. To 0.1 ml of solution S add 10 ml of water. Add 2 ml of a 10 g/l solution of phenylhydrazine hydrochloride, prepared immediately before use, 1 ml of potassium ferricyanide solution and 5 ml of hydrochloric acid. An intense red colour is formed. C. Mix 0.5 ml with 2 ml of water and 2 ml of silver nitrate solution in a test-tube. Add dilute ammonia until slightly alkaline. Heat on a water-bath. A grey precipitate or a silver mirror is formed. D. It complies with the limits of the assay. TESTS Solution S: Dilute 10 ml, filtered if necessary, to 50 ml with carbon dioxide-free water. Appearance of solution: Solution S is colourless. Acidity: To 10 ml of solution S add 1 ml of PhPh solution. Not more than 0.4 ml of 0.1 M sodium hydroxide is required to change the colour of the indicator to red. Methanol: To pass Gas chromatography. Sulphated ash: Maximum 0.1 per cent, determined on 1.0 g. SDS MSDS of Formaldehyde Solution BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Formaldehyde Solution IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Formaldehyde Solution