Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Aluminum Chloride Hexahydrate ---- Aluminium Potassium Sulphate ---- Aluminum Chlorohydrate ---- Aluminium Glycinate ---- Aluminium Magnesium Silicate ---- Dried Aluminium Phosphate ---- Dihydroxyaluminum Aminoacetate ---- Dihydroxyaluminum Sodium Carbonate ---- Aluminum Gluconate ---- Aluminum Monostearate & Aluminum Distearate ---- Aluminium Isopropoxide ---- Copper Cupric Chloride ---- Copper Sulfate ---- Ferric Ammonium Citrate ---- Ferric Chloride Hexahydrate ---- Ferric Nitrate Nonahydrate ---- Ferric Oxide ---- Ferric Sulfate ---- Ferrous Fumarate ---- Ferrous Gluconate ---- Ferrous Sulfate ---- Iron Aspartate ---- Iron Sulphide ---- Iron D Saccharate and Iron Sucrose Manufacturer & Exporter

Ferrous Sulfide or Iron Sulphide & Iron Pyrites SDS MSDS of Manufacturers & Exporters Please visit Ferrous Sulfide or Iron Sulphide & Iron Pyrites USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Ferrous Sulfide or Iron Sulphide CAS Number 1317-37-9 Iron Sulphide or Ferrous Sulfide SDS GHS, Safety Data Sheet MSDS, Material Safety Data Sheet 24-July-22 Section 1 - Chemical Product and Identification Product Name & Other Names: Iron Sulphide or Ferrous Sulfide. CAS#: 1317-37-9 EINECS/ELINCS: 215-268-6 Molecular Formula: FeS Molecular Weight: 87.91 Relevant uses and uses advised against (if any): Industrial Manufacturing. Suppliers: As per letterhead above. Section 2 - Hazards Identification GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Classification according to Regulation (EC) No 1272/2008 Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. This substance is not classified as dangerous according to Directive 67/548/EEC. Labeling according to Regulation (EC) No 1272/2008 GHS Label Elements NONE Signal Word: None Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapors/spray. P262: Do not get in eyes, on skin, or on clothing. P281: Use personal protective equipment as required. P302+P352 - IF ON SKIN: Wash with plenty of soap and water. P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Section 3 - Composition, Information on Ingredients Product Name & Other Names: Iron Sulphide or Ferrous Sulfide. CAS#: 1317-37-9 EINECS/ELINCS: 215-268-6 Section 4 - First Aid Measures Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Ingestion: If victim is conscious and alert, give 2-4 cupful of milk or water. Never give anything by mouth to an unconscious person. Get medical aid. Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear. Section 5 - Fire Fighting Measures General Information: For Ferrous sulfide, as in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing Media: For small fires over Iron Sulphide, use water spray, dry chemical, carbon dioxide or chemical foam. Extinguishing Media Not recommended: None specified. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Section 6 - Accidental Release Measures Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law. Section 7 - Handling and Storage Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong acids and oxidizing agents. Section 8 - Exposure Controls, Personal Protection Exposure Limits WEL: Short-term value: 2 mg/m³; Long-term value: 1 mg/m³ as Fe ACGIH: 1 mg/m3 TWA (as Fe) (listed under Iron salts (soluble) NIOSH: 1 mg/m3 TWA (as Fe) (listed under Iron salts (soluble) OSHA - Final PELs: None listed. Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling. Section 9 - Physical and Chemical Properties Appearance: Gray to brown black solid. Odor: None reported Odor threshold: Not available. pH: Not available. Relative density: 2 Boiling Point: Decomposes. Freezing/Melting Point: 1194 deg C Flash point: Not available. Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility: It is insoluble in water. Viscosity: No information found. Molecular Formula: FeS Molecular Weight: 87.91 Section 10 - Stability and Reactivity Chemical Stability: Stable under normal temperatures and pressures. Conditions to Avoid: Moisture, exposure to air, strong oxidants. Incompatibilities with Other Materials: Strong acids. Hazardous Decomposition Products: Oxides of sulfur, hydrogen sulfide. Hazardous Polymerization: Has not been reported. Section 11 - Toxicological Information LD50 Oral - Rat - female: >2000 mg/kg LD50 Dermal - Rat - male and female: >2000 mg/kg Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65. Teratogenic: No information found. Mutagenic: No information found. Section 12 - Ecological Information LC50-Gambusia affinis (Mosquito fish): > 10.000 mg/l – 96.0 h This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Section 13 - Disposal Considerations Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification. Section 14 - Transport Information Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods. Air Transport IATA/ICAO: Not dangerous goods. sea Transport IMDG/IMO: Not dangerous goods. Section 15 - Regulatory Information USA: California Proposition 65: Not listed. SARA 311/312 Hazards: No hazards specified. Section 16 - Additional Information DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of Ferrous Sulfide or Iron Sulphide & Iron Pyrites BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Ferrous Sulfide or Iron Sulphide & Iron Pyrites IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Ferrous Sulfide or Iron Sulphide & Iron Pyrites