Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Manganese Bisglycinate ---- Manganese Borogluconate ---- Manganese Chloride ---- Manganese Gluconate ---- Manganese Glycerophosphate ---- Manganese Picolinate ---- Manganese Pidolate ---- Manganese Sulfate ---- Selenious Acid ---- L-selenomitheonine ---- Selenium Glycinate ---- Selenium Metal ---- Stannous Chloride Dihydrate ---- Stannous Fluoride ---- Zinc Acetate ---- Zinc Aspartate ---- Zinc Chloride ---- Zinc Citrate ---- Zinc Gluconate ---- Zinc Glycerophosphate ---- Zinc Glycinate ---- Zinc Lactate ---- Zinc Malate ---- Zinc Oxide ---- Zinc Peroxide ---- Zinc Picolinate ---- Zinc Pidolate ---- Zinc Stearate ---- Zinc Sufate ---- Zinc Undecenoate Manufacturer & Exporter

Manganese Chloride Tetrahydrate Anhydrous Specifications of Commercial Pure & USP Analytical Reagent FCC Food Grade Manufacturers & Exporters Please visit Manganese Chloride USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Manganese Chloride Tetrahydrate CAS Number 13446-34-9 Manganese Chloride Anhydrous CAS Number 7773-01-5 Specifications of Manganese Chloride FCC Grade MnCl2 Formula weight, anhydrous 125.84 MnCl2-4H2O Formula wt, tetrahydrate 197.91 CAS: anhydrous CAS 7773-01-5 CAS: tetrahydrate CAS 13446-34-9 DESCRIPTION It occurs as large, irregular, pink, translucent crystals. It is freely soluble in water at room temperature and very soluble in hot water. Function: Nutrient. REQUIREMENTS Identification: A 1:20 aqueous solution gives positive tests for Manganese and for Chloride. Assay: Not less than 98.0% and not more than 102.0% of MnCl2·4H2O. Insoluble Matter: Not more than 0.005%. Iron: Not more than 5 mg/kg. Lead: Not more than 4 mg/kg. pH of a 5% Solution: Between 4.0 and 6.0. Substances Not Precipitated by Sulfide: Not more than 0.2%, after ignition. Sulfate: Not more than 0.005%. Specifications of Manganese Chloride Tetrahydrate USP Grade MnCl2.4H2O --- 197.90 Manganese (2+) chloride tetrahydrate CAS 13446-34-9. Anhydrous 125.84 CAS 7773-01-5. Manganese Chloride contains not less than 98.0 percent and not more than 101.0 percent of MnCl2, calculated on the dried basis. Identification: A: Yields white, curdy precipitate of silver chloride with silver nitrate TS, which is insoluble in nitric acid. After being washed with water, this precipitate is soluble in a slight excess of 6 N ammonium hydroxide. B: It meets the requirements of the test for Manganese. pH: between 3.5 and 6.0, 10 g dissolved in 200 mL of carbon dioxide- and ammonia-free water being used. Loss on drying: Dry it at 50 for 2 hours, then raise the temperature to 150 for 24 hours: it loses between 36.0% and 38.5% of its weight. Insoluble matter: Transfer 10 g to a 250-mL beaker, add 150 mL of water, cover the beaker, and heat to boiling. Digest the hot solution on a steam bath for 1 hour, and pass through a tared, fine-porosity filtering crucible. Rinse the beaker with hot water, passing the rinsings through the filter, and finally wash the filter with additional hot water. Dry the filter at 105C: the residue weighs not more than 0.5 mg (0.005%). Sulfate: A 2.0 g portion shows no more sulfate than corresponds to 0.10 mL of 0.020 N sulfuric acid (0.005%). Substances not precipitated by ammonium sulfide: Dissolve 2.0 g in about 90 mL of water, add 5 mL of ammonium hydroxide, and warm the solution to about 80 . Pass a stream of hydrogen sulfide through the solution for 30 minutes. Dilute with water to 100 mL, mix, and allow the precipitate to settle. Decant the supernatant through a fine-porosity filter, and transfer 50.0 mL to an evaporating dish that previously has been ignited and tared. Evaporate the filtrate to dryness, cool, add 0.5 mL of sulfuric acid, heat gently to remove the excess acid, and ignite at 800 ± 25 for 15 minutes: the weight of the residue is not greater than 2.0 mg (0.2% as sulfate). Iron: Dissolve 2.0 g in 40 mL of water: the limit is 5 µg per g. Zinc: Dissolve 1 g in a mixture of 48 mL of water and 2 mL of sulfuric acid, and add, slowly and with constant agitation, 1 mL of potassium ferrocyanide solution (1 in 100): no turbidity is produced within 5 minutes. Heavy metals: the limit is 5 µg per g. Manganese Chloride Tetrahydrate Analytical Reagent Grade Manganese (II) Chloride Tetrahydrate Molecular Formula: MnCl2-4H2O Molecular Weight: 197.90 CAS Number 13446-34-9 REQUIREMENTS Assay: 98.0-101.0% MnCl2-4H2O pH of a 5% solution: 3.5-6.0 at 25C MAXIMUM ALLOWABLE Insoluble matter: 0.005% Sulfate (SO4): 0.005% Heavy metals (as Pb): 5 ppm Iron (Fe): 5 ppm Calcium (Ca): 0.005% Magnesium (Mg): 0.005% Potassium (K): 0.01% Sodium (Na): 0.05% Zinc (Zn): 0.005% SDS MSDS of Manganese Chloride Tetrahydrate Anhydrous BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Manganese Chloride Tetrahydrate Anhydrous IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Manganese Chloride Tetrahydrate Anhydrous