Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Ammonium Bromide ---- Ammonium Bicarbonate ---- Ammonium Carbonate ---- Ammonium Chloride ---- Ammonium Phosphate Monobasic ---- Ammonium Phosphate Dibasic ---- Ammonium Persulfate ---- Ammonium Sulfate ---- Bismuth Citrate ---- Bismuth Subcarbonate ---- Bismuth Subcitrate Potassium ---- Bismuth Subgallate ---- Heavy Bismuth Subnitrate ---- Bismuth Subsalicylate ---- Lithium Carbonate ---- Lithium Citrate ---- Lithium Hydroxide Manufacturer & Exporter

Monoammonium Phosphate or Ammonium Phosphate Monobasic SDS MSDS of Manufacturers & Exporters Please visit Monoammonium Phosphate or Ammonium Phosphate Monobasic USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Monoammonium Phosphate or Ammonium Phosphate Monobasic CAS Number 7722-76-1 Monoammonium Phosphate or Ammonium Phosphate Monobasic SDS, Safety Data Sheet MSDS, Material Safety Data Sheet 31-July-22 1. Product Identification Product Name & Other Names: Monoammonium phosphate or Primary ammonium phosphate or ammonium dihydrogen phosphate or ammonium biphosphate or phosphoric acid monoammonium salt, Monobasic Ammonium Phosphate or Ammonium Phosphate Monobasic or Mono ammonium phosphate. CAS No.: 7722-76-1 EINECS EC Number: 231-764-5 Molecular Weight: 115.04 Chemical Formula: NH4H2PO4 Relevant uses and uses advised against (if any): Industrial Manufacturing. Suppliers: As per letterhead. 2. Hazards Identification GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Classification according to Regulation (EC) No 1272/2008 Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. This substance is not classified as dangerous according to Directive 67/548/EEC. Labeling according GHS & Regulation (EC) No 1272/2008 GHS Label Elements NONE Signal Word: None Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapors/spray. P262: Do not get in eyes, on skin, or on clothing. P281: Use personal protective equipment as required. P302+P352 - IF ON SKIN: Wash with plenty of soap and water. P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+313: If eye irritation persists get medical advice/attention. 3. Composition/Information on Ingredients Product Name & Other Names: Monoammonium phosphate or Primary ammonium phosphate or ammonium dihydrogen phosphate or ammonium biphosphate or phosphoric acid monoammonium salt, Monobasic Ammonium Phosphate or Ammonium Phosphate Monobasic or Mono ammonium phosphate. CAS No.: 7722-76-1 EINECS EC Number: 231-764-5 4. First Aid Measures Always seek medical attention after first aid measures are provided. Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Ingestion: Induce vomiting as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention. Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention. 5. Fire Fighting Measures Fire: Not considered to be a fire hazard. Fire may produce toxic fumes. Explosion: Monoammonium Phosphate is not considered to be an explosion hazard. Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Extinguishing Media Not recommended: None specified. Special hazards arising from the substance or mixture: nitrogen oxides (NOx), oxides of phosphorus Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. 6. Accidental Release Measures Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. 7. Handling and Storage Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids, sodium hypochlorite. 8. Exposure Controls/Personal Protection Airborne Exposure Limits: None established for Mono Ammonium Phosphate. Ventilation System: In general, dilution ventilation is a satisfactory health hazard control for Monoammonium Phosphate. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact. Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. 9. Physical and Chemical Properties Appearance: Brilliant white crystals or granules. Odor: Faint acid odor. Odor threshold: Not available. pH: around 4.2 Relative density: around 1.8 Melting Point: 190C (374F) Initial boiling point and boiling range: Not available. Flash point: Not available. Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility: Soluble 1 g/2.5 ml water. Viscosity: No information found. Molecular Weight: 115.04 Chemical Formula: NH4H2PO4 10. Stability and Reactivity Stability: Stable under ordinary conditions of use and storage. Hazardous Decomposition Products: Burning may produce ammonia and oxides of phosphorus. Hazardous Polymerization: Will not occur. Incompatibilities: Strong oxidizing agents, Strong acids, Sodium hypochlorite. Conditions to Avoid: Incompatibles. 11. Toxicological Information Acute toxicity LD50 Oral - rat - male and female - > 2.000 mg/kg LD50 Dermal - rat - male and female - > 5.000 mg/kg Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP. Teratogenic Effects: Not available. Mutagenic Effects: Not available. Developmental Toxicity: Not available. Reproductive Effects: No information available. 12. Ecological Information Toxicity to fish: static test LC50 - Oncorhynchus mykiss (rainbow trout) - > 85,9 mg/l - 96 h Persistence and Degradability: No information found. Mobility: No information found. Bioaccumulation/ Accumulation: No information found. Results of PBT and vPvB assessment: No information found. 13. Disposal Considerations Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. 14. Transport Information Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled. Air Transport IATA/ICAO: Not controlled. Sea Transport IMDG/IMO: Not controlled. 15. Regulatory Information USA: California Proposition 65: Not listed. SARA 311/312: No SARA Hazards. 16. Other Information DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of Monoammonium Phosphate or Ammonium Phosphate Monobasic BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Monoammonium Phosphate or Ammonium Phosphate Monobasic IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Monoammonium Phosphate or Ammonium Phosphate Monobasic