Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Phenoxyethanol ---- Phenyl Ethanol ---- Phenyl Mercuric Acetate ---- Phenyl Mercuric Nitrate ---- Polyvinyl Acetate ---- Polyvinyl Alcohol ---- Polysorbate ---- Propionic Acid ---- Propyl Gallate ---- Propylene Glycol ---- Propylparaben ---- Propylene Carbonate ---- Butylated Hydroxyanisole Manufacturer & Exporter

Phenoxyethanol Specifications of Commercial Pure & BP Ph Eur USP NF Grade Manufacturers & Exporters Please visit Phenoxyethanol USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Phenoxyethanol CAS Number 122-99-6 Phenoxyethanol or Ethylene glycol monophenyl ether or 2-Phenoxyethyl alcohol SDS, Safety Data Sheet MSDS, Material Safety Data Sheet 11-Aug-22 1. Product Identification Product Name & Other Names: Phenoxyethanol or Ethylene glycol monophenyl ether or 2-Phenoxyethyl alcohol. CAS No.: 122-99-6 EINECS EC Number: 204-589-7 Molecular Weight: 138.2 Chemical Formula: C8H10O2 Relevant uses and uses advised against (if any): Industrial Manufacturing. Suppliers: As per letterhead. 2. Hazards Identification GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Classification according to Regulation (EC) No 1272/2008 Acute toxicity, oral Category 4, H302 Serious eye damage/eye irritation Category 2A, H319 Labeling according to Regulation (EC) No 1272/2008 GHS Label Elements Irritant Signal Words: Warning Hazard statements: H302: Harmful if swallowed. H319: Causes serious eye irritation. Precautionary statements: P264: Wash --- thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P280: Wear protective gloves/protective clothing/eye protection/face protection. P330: Rinse mouth. P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing. P337+313: If eye irritation persists get medical advice/attention. 3. Composition/Information on Ingredients Product Name & Other Names: Phenoxyethanol or Ethylene  glycol monophenyl ether or 2-Phenoxyethyl alcohol. CAS No.: 122-99-6 EINECS EC Number: 204-589-7 4. First Aid Measures Always seek medical attention after first aid measures are provided. Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Ingestion: Never give anything by mouth to an unconscious person. Get medical attention. Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately. 5. Fire Fighting Measures Flammability of the Product: Combustible at high temperature. Vapors can travel to a source of ignition and flash back. Auto-Ignition Temperature: 475C. Flash Points: 1266C Closed Cup. Products of Combustion: Fumes, Carbon dioxide & Carbon Monoxide. Explosion: Explosive on heating. Fire Extinguishing Media: Use means suitable for extinguishing surrounding fire. Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment Clean-up procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Containers may explode on heating. 6. Accidental Release Measures Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment cleanup procedures and Storage: Avoid touching the spilled material. Do not let the product enter drains. Avoid breathing vapors, mist, or gas. Ensure adequate ventilation. Contain spilled material. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. 7. Handling and Storage Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents. Keep away from heat, sun light. 8. Exposure Controls/Personal Protection Airborne Exposure Limits: Not Specified. Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling. 9. Physical and Chemical Properties Appearance: Colorless liquid. Odor: Mild. Odor threshold: Not available. pH: Not available. Relative density: Not available. Boiling Point: 244C to 246C literature. Melting Point: 11C to 13C literature. Flash point: 126C. Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility: It is slightly soluble in water. Viscosity: No information found. Molecular Weight: 138.2 Chemical Formula: C8H10O2 10. Stability and Reactivity Stability: Stable under ordinary conditions of use and storage. Hazardous Decomposition Products: It emits carbon monoxide & fumes when heated to decomposition. It may form harmful gases. Hazardous Polymerization: Will not occur. Incompatibilities: Strong oxidizing agents. Conditions to Avoid: Incompatible materials, light, dust/mist generation, excess heat. 11. Toxicological Information ORAL-RAT LD50 1850 mg/kg INHALATION-Rat LC50 >1000 mg.m3. Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP. Teratogenic Effects: No information found. Mutagenic Effects: No information found. Developmental Toxicity: No information found. Reproductive Effects: No information found. 12. Ecological Information Toxicity to fish: static test LC50 - Leuciscus idus (Golden orfe) - > 220 - < 460 mg/l - 96 h. Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - > 500 mg/l - 48 h Persistence and Degradability: Unlikely to persist due to water solubility. Mobility: Likely to be mobile due to water solubility. Bioaccumulation/ Accumulation: Biodegradable. Results of PBT and vPvB assessment: No information found. 13. Disposal Considerations Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. 14. Transport Information Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled. Sea Transport IMDG/IMO: Not controlled. Air Transport ICAO/IATA: Not controlled. 15. Regulatory Information USA: SARA 311/312 Hazards: Acute Health Hazard. California Prop. 65 Components: Not listed to cause cancer, birth defects, or any other reproductive harm. 16. Other Information DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of Phenoxyethanol BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Phenoxyethanol IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Phenoxyethanol