Crystal Clear Products Ankleshwar India
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Home

Phenoxyethanol ---- Phenyl Ethanol ---- Phenyl Mercuric Acetate ---- Phenyl Mercuric Nitrate ---- Polyvinyl Acetate ---- Polyvinyl Alcohol ---- Polysorbate ---- Propionic Acid ---- Propyl Gallate ---- Propylene Glycol ---- Propylparaben ---- Propylene Carbonate ---- Butylated Hydroxyanisole

PalletizedDrumSea Cargo ExportAir Cargo Export
Manufacturer & Exporter

Phenyl Mercury Acetate or Phenylmercuric Acetate SDS MSDS of Manufacturers & Exporters

Please visit Phenyl Mercury Acetate or Phenylmercuric Acetate USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals

Phenylmercuric Acetate Phenyl Mercury Acetate Suppliers Manufacturers
Phenyl Mercury Acetate or Phenyl mercuric Acetate CAS Number 62-38-4

Phenyl Mercuric Acetate SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet
11-Aug-22

Section 1. Product Information

Product Name & Other Names: Phenyl Mercuric Acetate or Mercury phenyl acetate.
CAS No.: 62-38-4
EINECS EC Number: 200-532-5
Chemical Formula: C8H8HgO2
Molecular Weight: 336.74
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

Section 2: Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, Oral (Category 2), H300
Skin corrosion/irritation Category 1A, B, C H314
Specific target organ toxicity, repeated exposure Category 1, H372
Chronic aquatic toxicity (Category 1), H410

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Aquatic Toxicity
Aquatic Toxicity

GHS Label Elements
Toxic
Toxic

GHS Label Elements
Health Hazard
Health Hazard

GHS Label Elements
Corrosive
Corrosive

Signal Words: Danger

Hazard statements:
H300 Fatal if swallowed.
H314 Causes severe skin burns and eye damage.
H372 Causes damage to organs through prolonged or repeated exposure.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P272: Contaminated work clothing should not be allowed out of the workplace.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P314: Get medical advice/attention if you feel unwell.
P330: Rinse mouth.
P301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P333+313: If skin irritation or a rash occurs: Get medical advice/attention.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.

Section 3: Composition and Information on Ingredients

Product Name & Other Names: Phenyl Mercuric Acetate or Mercury phenyl acetate.
CAS No.: 62-38-4
EINECS EC Number: 200-532-5

Section 4. First Aid & Procedure

Always get medical attention after the first aid is over.

Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin:
 Immediately flush skin with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and shoes before reuse. Get medical attention if irritation develops.
Eyes:
 Immediately flush eyes with plenty of water for 15 minutes, occasionally lifting upper and lower eyelids. Hold eyelids apart during irrigation. Get medical attention.
Inhalation:
 Remove person to fresh air. If breathing is difficult, give oxygen. If not breathing administer artificial respiration. Get medical attention.

Section 5. Fire Fighting Measures

Fire/Explosion: Not considered to be a fire and explosion hazard.
Extinguishing Medium: 
Water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special hazards arising from the substance/ mixture: Mercury oxides, carbon oxides and fumes.
Fire Fighting Instructions: Use suitable protective equipment for surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

Section 6. Spills and Disposals

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Do not touch or walk through this product. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container.

Section 7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and strong acids.

Section 8. Exposure Controls & Personal Protection

Exposure Limits for Phenyl Mercuric Acetate:
USA. NIOSH Recommended Exposure Limits: 0.05mg/m3 TWA.
ACGIH TLV: 0.1 mg/m3 (TWA).
Engineering Controls: Use adequate exhaust ventilation to keep airborne concentrations below the allowable exposure limit.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

Section 9. Physical & Chemical Data

Appearance: Beige powdered solid.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Melting point/freezing point: Melting point/range: 148 - 151C.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: No information found.
Decomposition temperature: No information found.
Upper/lower flammability or explosive limits: No information found.
Vapor pressure: No information found.
Vapor density: No information found.
Evaporation rate: No information found.
Flammability (solid, gas): No information found.
Partition coefficient: n-octanol/water: No information found.
Solubility(ies): No information found.
Viscosity: No information found.
Chemical Formula: C8H8HgO2
Molecular Weight: 336.74

Section 10. Stability and Reactivity

Chemical Stability: Stable under normal temperatures and pressures.
Incompatibility (Materials to Avoid):
 Strong acids and strong oxidizing agents,.
Conditions to Avoid: Incompatible materials, exposure to moist air or water, excessive heat.
Hazardous Decomposition Products: Mercury oxides, carbon oxides and fumes.
Hazardous Polymerization:
 Will not occur.

Section 11. Toxicological Information

Toxicity to Animals: LD50 Oral - Rat - 41 mg/kg.
Carcinogenicity: Not listed as a suspected/confirmed carcinogen by NTP, OSHA.
IARC: 2B - Group 2B: Possibly carcinogenic to humans (Phenylmercury acetate).
Teratogenic Effects: No information found.
Mutagenic Effects: No information found.
Developmental Toxicity: No information found.
Reproductive Effects: No information found.

Section 12. Ecological Information

Toxicity to fish: LC50 - Oncorhynchus mykiss (rainbow trout) - 0.0090 mg/l - 96.0 h
Toxicity to daphnia and other aquatic invertebrates: LC50 - Daphnia pulex (Water flea) - 0.005 mg/l - 3 h
Ecotoxicity: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Persistence and Degradability: No information found.
Mobility: No information found.
Bioaccumulation/ Accumulation: No information found.
Results of PBT and vPvB assessment: No information found.

Section 13. Disposal Suggestions

Dispose of in accordance with all applicable local, state, and federal regulations at an approved waste disposal facility.

Section 14. Transport and Label Information

Land Transport DOT USA, TDG Canada & ADR/RID Europe:
UN-No UN 1674
Proper Shipping Name: Phenylmercuric acetate
Hazard Class 6.1; Packing Group II
Sea Transport IMDG/IMO
UN-No UN 1674
Proper Shipping Name: Phenylmercuric acetate
Hazard Class 6.1; Packing Group II
Air Transport ICAO/IATA:
UN-No UN 1674
Proper Shipping Name: Phenylmercuric acetate
Hazard Class 6.1; Packing Group II.

Section 15. Regulatory Information

USA:
SARA 311/312 Hazards
: Acute Health Hazard, Chronic Health Hazard.
California Prop. 65 Components: WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive, CAS-No.: 62-38-4

Section 16. Other Information

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user.

Specifications of Phenyl Mercury Acetate or Phenylmercuric Acetate BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Phenyl Mercury Acetate or Phenylmercuric Acetate IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products Logo

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Phenyl Mercury Acetate or Phenylmercuric Acetate