Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Phenoxyethanol ---- Phenyl Ethanol ---- Phenyl Mercuric Acetate ---- Phenyl Mercuric Nitrate ---- Polyvinyl Acetate ---- Polyvinyl Alcohol ---- Polysorbate ---- Propionic Acid ---- Propyl Gallate ---- Propylene Glycol ---- Propylparaben ---- Propylene Carbonate ---- Butylated Hydroxyanisole Manufacturer & Exporter

Polyvinyl Alcohol Specifications of Commercial Pure & BP Ph Eur USP Grade Manufacturers & Exporters Please visit Polyvinyl Alcohol USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Polyvinyl Alcohol CAS Number 9002-89-5 Specifications of Polyvinyl Alcohol USP Grade (C2H4O)n Ethenol, homopolymer. Vinyl alcohol polymer CAS Number 9002-89-5. Polyvinyl Alcohol is a water-soluble synthetic resin, represented by the formula: (C2H4O)n in which the average value of n lies between 500 and 5000. It is prepared by 85 percent to 89 percent hydrolysis of polyvinyl acetate. The apparent viscosity, in centipoises, at 20C, of a solution containing 4 g of Polyvinyl Alcohol in each 100 g is not less than 85.0 percent and not more than 115.0 percent of that stated on the label. pH: between 5.0 and 8.0, in a solution (1 in 25). Loss on drying: Dry it at 110 to constant weight: it loses not more than 5.0% of its weight. Residue on ignition: not more than 2.0%. Water-insoluble substances: 0.1%. Degree of hydrolysis: to meet the requirement. Specifications of Poly(vinyl alcohol) or Poly vinyl alcohol BP Ph Eur Grade Poly(vinyl alcohol) is obtained by polymerisation of vinyl acetate, followed by partial or almost complete hydrolysis of poly(vinyl acetate) in the presence of catalytic amounts of alkali or mineral acids. Poly(vinyl alcohol) polymers comply with the following indices: The mean relative molecular mass lies between 20 000 and 150 000. The viscosity is 3 to 70 mPas. The ester value which characterises the degree of hydrolysis is not greater than 280. CHARACTERS Appearance: Yellowish-white powder or translucent granules. Solubility: Soluble in water, slightly soluble in ethanol, practically insoluble in acetone. Various grades of poly(vinyl alcohol) are available. They differ in their degree of polymerisation and their degree of hydrolysis which determine the physical properties of the different grades. They are characterised by the viscosity and the ester value of the substance. IDENTIFICATION A. Infrared absorption spectrophotometry: To pass the test. Preparation Discs; in some cases, the sample has to be milled, after cooling if necessary, before preparing the discs. The spectrum obtained shows absorption maxima corresponding to poly(vinyl alcohol) at 2940 cm-1 and 2920 cm-1. B. It complies with the test for viscosity (see Tests). TESTS Solution S: Heat on a water-bath 250 ml of water R in a borosilicate round-bottomed flask attached to a reflux condenser with stirrer, add 10.0 g of the substance to be examined and continue heating for 30 min with continuous stirring. Remove the flask from the water-bath and continue stirring until room temperature is reached. Appearance of solution: Solution S is clear and not more intensely coloured than reference solution. pH: 4.5 to 6.5 for solution S. Viscosity: 85 per cent to 115 per cent of the value stated on the label. Determine the viscosity using a falling ball viscometer immediately after preparation of solution S at 20±0.1C. Acid value: Maximum 3.0. Ester value: 90 per cent to 110 per cent of the value stated on the label. Heavy metals: Maximum 10 ppm. Loss on drying: Maximum 5.0 per cent, determined on 1.000 g by drying in an oven at 105C for 3 h. Sulphated ash: Maximum 1.0 per cent, determined on 1.0 g. SDS MSDS of Polyvinyl Alcohol BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Polyvinyl Alcohol IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Polyvinyl Alcohol