Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Potassium Acetate ---- Potassium Ascorbate ---- Potassium Bicarbonate ---- Potassium Bitartrate ---- Potassium Bromide ---- Potassium Carbonate ---- Potassium Citrate ---- Potassium Chloride ---- Potassium Gluconate ---- Potassium Glycinate ---- Potassium Hydroxide ---- Potassium Iodate ---- Potassium Iodide ---- Potassium Metabisulfite ---- Potassium Molybdate ---- Potassium Monopersulfate ---- Potassium Nitrate ---- Potassium Nitrite ---- Potassium Oleate ---- Potassium Persulfate ---- Potassium Phosphate Monobasic ---- Potassium Phosphate Dibasic ---- Potassium Phosphate Tribasic ---- Potassium Pidolate ---- Potassium Propionate ---- Potassium Saccharate ---- Potassium Sorbate Manufacturer & Exporter

Potassium Bromide Specifications of Commercial Pure & BP Ph Eur USP Analytical Reagent Grade Manufacturers & Exporters Please visit Potassium Bromide USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Potassium Bromide CAS Number 7758-02-3 Specifications of Potassium Bromide BP DEFINITION Content: 98.0 per cent to 100.5 per cent (dried substance). CHARACTERS Appearance: White or almost white, crystalline powder or colourless crystals. Solubility: Freely soluble in water and in glycerol, slightly soluble in alcohol. IDENTIFICATION A. It gives reaction of bromides. B. Solution S (see Tests) gives the reactions of potassium. TESTS Solution S: Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water R and dilute to 100 ml with the same solvent. Appearance of solution: Solution S is clear and colourless. Acidity or alkalinity: To 10 ml of solution S add 0.1 ml of bromothymol blue solution R1. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator. Bromates: To 10 ml of solution S add 1 ml of starch solution R, 0.1 ml of a 100 g/l solution of potassium iodide and 0.25 ml of 0.5 M sulphuric acid and allow to stand protected from light for 5 min. No blue or violet colour develops. Chlorides: Maximum 0.6 per cent. Iodides: To 5 ml of solution S add 0.15 ml of ferric chloride solution and 2 ml of methylene chloride. Shake and allow to separate. The lower layer is colourless. Sulphates: Maximum 100 ppm. Iron: Maximum 20 ppm. Magnesium and alkaline-earth metals: Maximum 200 ppm, calculated as Ca. Heavy metals: Maximum 10 ppm. Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105C for 3h. Specifications of Potassium Bromide USP KBr --- 119.0 Potassium Bromide contains not less than 98.0 percent and not more than 100.5 percent of KBr, calculated on the dried basis. It contains no added substances. Appearance of solution: clear and colorless. Test solution— Dissolve 10.0 g in carbon dioxide-free water, and dilute with the same solvent to 100 mL. Identification: A: A solution containing 4.5 mg of potassium bromide responds to the test for Bromide. B: Responds to the test for Potassium. Acidity or alkalinity: To 10 mL of the solution prepared for the test for Appearance of solution, add 0.1 mL of bromothymol blue TS: not more than 0.5 mL of 0.01 N hydrochloric acid or 0.01 N sodium hydroxide is required to change the color of this solution. Loss on drying: Dry it at 100 to 105 for 3 hours: it loses not more than 1.0% of its weight. Bromates: Starch-mercuric iodide solution: Triturate 1.0 g of soluble starch with 5 mL of water and pour the mixture into 100 mL of boiling water, containing 10 mg of mercuric iodide. Procedure: To 10 mL of the solution prepared for the test for Appearance of solution add 1 mL of Starch-mercuric iodide solution, 0.1 mL of a 100 g per L solution of potassium iodide, and 0.25 mL of 0.5 M sulfuric acid. Allow to stand protected from light for 5 minutes: no blue or violet color develops. Limit of chlorine: not more than 0.6%. Iodides: To 5 mL of the solution prepared for the test for Appearance of solution add 0.15 mL of a 10.5 g per 100 mL ferric chloride solution, and 2 mL of dichloromethane. Shake, and allow to separate. The lower layer is colorless. Sulfates: A 2.0-g portion shows no more sulfate than corresponds to 0.2 mL of 0.020 N sulfuric acid (0.01%). Limit of iron: not more than 20 ppm. Magnesium and alkaline-earth metals: (0.02%, calculated as Ca). Heavy metals: not more than 10 ppm. Specifications of Potassium Bromide Analytical Reagent KBr Formula Wt 119.00 CAS Number 7758-02-3 REQUIREMENTS Assay: 99.0% KBr pH of a 5% solution: 5.0-8.8 at 25C MAXIMUM ALLOWABLE Insoluble matter: 0.005% Bromate (BrO3): 0.001% Iodate (IO3): 0.001% Chloride (Cl): 0.2% Iodide (I): 0.001% Nitrogen compounds (as N): 0.005% Sulfate (SO4): 0.005% Barium (Ba): 0.002% Heavy metals (as Pb): 5 ppm Iron (Fe): 5 ppm Calcium (Ca): 0.002% Magnesium (Mg): 0.001% Sodium (Na): 0.02%. SDS MSDS of Potassium Bromide BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Potassium Bromide IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Potassium Bromide