Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Potassium Acetate ---- Potassium Ascorbate ---- Potassium Bicarbonate ---- Potassium Bitartrate ---- Potassium Bromide ---- Potassium Carbonate ---- Potassium Citrate ---- Potassium Chloride ---- Potassium Gluconate ---- Potassium Glycinate ---- Potassium Hydroxide ---- Potassium Iodate ---- Potassium Iodide ---- Potassium Metabisulfite ---- Potassium Molybdate ---- Potassium Monopersulfate ---- Potassium Nitrate ---- Potassium Nitrite ---- Potassium Oleate ---- Potassium Persulfate ---- Potassium Phosphate Monobasic ---- Potassium Phosphate Dibasic ---- Potassium Phosphate Tribasic ---- Potassium Pidolate ---- Potassium Propionate ---- Potassium Saccharate ---- Potassium Sorbate Manufacturer & Exporter

Potassium Iodide SDS MSDS of Manufacturers & Exporters Please visit Potassium Iodide USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Potassium Iodide CAS Number 7681-11-0 Potassium Iodide SDS, Safety Data Sheet MSDS, Material Safety Data Sheet 08-Aug-22 1. Product Identification Product Name & Other Names: Potassium iodide or Knollide or Potide or Iodic acid potassium salt or Hydroiodic acid potassium salt. CAS No.: 7681-11-0 EINECS EC Number: 231-659-4 Molecular Weight: 166 Chemical Formula: KI Relevant uses and uses advised against (if any): Industrial Manufacturing. Suppliers: As per letterhead. 2. Hazards Identification GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Classification according to Regulation (EC) No 1272/2008 Acute toxicity, Oral (Category 4), H302 Skin irritation (Category 2), H315 Eye irritation (Category 2), H319 Labeling according to GHS & Regulation (EC) No 1272/2008 GHS Label Elements Irritant Signal Words: Warning Hazard statements: H302: Harmful if swallowed. H315: Causes skin irritation. H319: Causes serious eye irritation. Precautionary statements: P264: Wash --- thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P280: Wear protective gloves/protective clothing/eye protection/face protection. P330: Rinse mouth. P362: Take off contaminated clothing and wash before reuse. P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. P302+352: IF ON SKIN: Wash with soap and water. P332+313: If skin irritation occurs: Get medical advice/attention. P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing. P337+313: If eye irritation persists get medical advice/attention. 3. Composition/Information on Ingredients Product Name & Other Names: Potassium iodide or Knollide or Potide or Iodic acid potassium salt or Hydroiodic acid potassium salt. CAS No.: 7681-11-0 EINECS EC Number: 231-659-4 4. First Aid Measures Always seek medical attention after first aid measures are provided. Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Ingestion: Never give anything by mouth to an unconscious person. Get medical attention. Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately. 5. Fire Fighting Measures Flammability of the Product: Non-flammable. Products of Combustion: Hydrogen Iodide, Iodine, Oxides of Potassium etc.. Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Use any means suitable for extinguishing surrounding fire. Extinguishing Media Not recommended: None specified. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. On decomposition it may emit hydrogen iodide. Containers may explode on heating. 6. Accidental Release Measures Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. 7. Handling and Storage Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, chlorinated compounds, metals & acids. 8. Exposure Controls/Personal Protection Airborne Exposure Limits: USA ACGIH, ACGIH TWA (ppm): 0.01 ppm Inhalable fraction Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling. 9. Physical and Chemical Properties Appearance: Colorless white powder or crystals. Odor: It is odorless. Odor threshold: Not available. pH: 6-9. Relative density: around 3.13 Boiling Point: 1330C 2426F. Melting Point: 681C 1257F. Flash point: Not available. Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility: It is freely soluble in water. 76 parts in 100 parts water @ 25 deg. C Viscosity: No information found. Molecular formula: KI Molecular weight: 166 10. Stability and Reactivity Stability: Stable under ordinary conditions of use and storage. Hazardous Decomposition Products: It emits toxic iodide or hydrogen iodide fumes when heated to decomposition. It may form potassium oxide and hydrogen iodide and iodide. Hazardous Polymerization: Will not occur. Incompatibilities: Strong oxidizing agents, chlorinated compounds, metals & acids. Conditions to Avoid: Incompatibles, heat, light, and moisture. 11. Toxicological Information LD50 Oral - mouse - 1000 mg/kg LD50 Oral - Rat - 2799 mg/kg Carcinogenic Effects: Not a reported carcinogen by IARC NTP ACGIH OSHA. Mutagenic Effects: Mutagenic for mammalian somatic cells. Investigated as a mutagen, reproductive effector. Teratogenic Effects: Iodine salts can cause deformity, illness, and death of a fetus. Developmental Toxicity: No information found. 12. Ecological Information Toxicity to fish: LC50 - Oncorhynchus mykiss (rainbow trout) - 2.190 mg/l - 96 h Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia - 2,7 mg/l - 24 h Persistence and Degradability: Unlikely to persist due to water solubility. Mobility: Mobile due to water solubility. Bioaccumulation/ Accumulation: No information found. Results of PBT and vPvB assessment: No information found. 13. Disposal Considerations Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. 14. Transport Information Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled. Sea Transport IMDG/IMO: Not controlled. Air Transport IATA/ICAO: Not controlled. 15. Regulatory Information USA: SARA 311/312 Hazards: See section 2. California Prop.65: Not Listed. 16. Other Information DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of Potassium Iodide BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Potassium Iodide IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Potassium Iodide