Crystal Clear Products Ankleshwar India
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Home

Soda Lime ---- Sodium Acetate ---- Sodium Adipate ---- Sodium Alginate ---- Sodium Ascorbate ---- Sodium Benzoate ---- Sodium Bicarbonate ---- Sodium Bisulfate ---- Sodium Borate, Borax ---- Sodium Bromate ---- Sodium Bromide ---- Sodium Butyl Paraben ---- Sodium Butyrate ---- Sodium Caprylate ---- Sodium Chloride ---- Sodium Citrate ---- Sodium Diacetate ---- Sodium Erythorbate -- Sodium Ethyl Paraben ---- Sodium Formate ---- Sodium Gluconate ---- Sodium Glycerophosphate ---- Sodium Formaldehyde Bisulfite ---- Sodium Hyaluronate ---- Sodium Hydroxide ---- Sodium Lactate ---- Sodium Lactobionate ---- Sodium Lauryl Sulfate ---- Sodium Methyl Paraben ---- Sodium Metabisulfite ---- Sodium Molybdate ---- Sodium Nitrate ---- Sodium Nitrite ---- Sodium Oleate ---- Sodium Perborate ---- Sodium Persulfate ---- Sodium Phosphate Monobasic ---- Sodium Phosphate Dibasic ---- Sodium Phosphate Tribasic ---- Sodium Picosulfate ---- Sodium Propyl Paraben ---- Sodium Propionate ---- Sodium Saccharin ---- Sodium Selenate ---- Sodium Selenite ---- Sodium Stibogluconate ---- Sodium Sulfate ---- Sodium Sulfide Nonahydrate ---- Sodium Tartrate ---- Sodium Thiosulfate ---- Benzyl Benzoate ---- Selenious Acid

PalletizedDrumSea Cargo ExportAir Cargo Export
Manufacturer & Exporter

Sodium Erythorbate SDS MSDS of Manufacturers & Exporters

Please visit Sodium Erythorbate USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals

Sodium Erythorbate Suppliers Manufacturers
Sodium Erythorbate CAS Number 6381-77-7 or 63524-04-9

Sodium Erythorbate or Sodium Isoascorbate SDS, Safety Data Sheet
MSDS Sheet
04-July-22

Section 1: Chemical Product

Product Name & Other Names: Sodium Erythorbate or Sodium Isoascorbate.
CAS#: 6381-77-7
EINECS EC number: 228-973-9
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Supplier: As per letterhead.

Section 2: Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Serious eye damage/eye irritation Category 2A, H319

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Irritant
Irritant

Signal Word: Warning

Hazard statements:
H319: Causes serious eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Section 3: Composition and Information on Ingredients

Product Name & Other Names:Sodium Erythorbate or Sodium Isoascorbate.
CAS#: 6381-77-7
EINECS EC number: 228-973-9

Section 4: First Aid Measures

Always seek medical attention after first aid measures are provided.

Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention.
Skin Contact: After contact of Sodium Diacetate with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases, and groin. Cold water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing.
Serious Skin Contact: Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.
Inhalation: Allow the victim to rest in a well-ventilated area. Seek immediate medical attention.
Serious Inhalation: Not available.
Ingestion: Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt, or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.

Section 5: Fire and Explosion Data

Flammability of the Product: May be combustible at elevated temperature.
Products of Combustion: These products are carbon oxides (CO, CO2). Some metallic oxides.
Fire Fighting Media and Instructions:
SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog, or foam. Do not use water jet.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At elevated temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

Section 6: Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Do not inhale vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

Section 7: Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like strong oxidizing agents. Ground all equipment. Combustible material should be stored away from extreme heat and away from strong oxidizing agents.

Section 8: Exposure Controls/Personal Protection

Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice.

Section 9: Physical and Chemical Properties

Physical state and appearance: White Crystalline Powder or Granules.
Odor: No data found.
Odor threshold: No data found.
pH (1% solution/water): 5.5 to 8
Relative density: No data found.
Melting Point: No data found.
Initial boiling point and boiling range: No data found.
Flash point: No data found.
Auto-ignition temperature: No information available.
Decomposition temperature: No information available.
Upper/lower flammability or explosive limits: No information available.
Vapor pressure: No information available.
Vapor density: No information available.
Evaporation rate: No information available.
Flammability (solid, gas): No information available.
Partition coefficient: n-octanol/water: No information found.
Solubility: Soluble in cold water, hot water.
Viscosity: No information found.

Section 10: Stability and Reactivity Data

Stability: Stable under good condition of storage.
Incompatibility with various substances:
Strong oxidizing agents.
Corrosivity: Non-corrosive in presence of glass.
Polymerization: Not reported.

Section 11: Toxicological Information

Toxicity to Animals: No information found.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: No information found.
Mutagenic Effects: No information found.
Developmental Toxicity: No information found.
Reproductive Effects: No information found.

Section 12: Ecological Information

Aquatic toxicity (acute): No data found.
Results of PBT and vPvB assessment: This substance is not considered to be persistent, bioaccumulating nor toxic (PBT).

Section 13: Disposal Considerations

Waste Disposal: To be done as per local regulations.

Section 14: Transport Information

Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
Sea Transport IMDG/IMO: Not controlled.
Air Transport IATA/ICAO: Not controlled.

Section 15: Other Regulatory Information

USA:
SARA 311/312: No hazard applicable.
California Proposition 65: Not listed.

Section 16 - Additional Information

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Specifications of Sodium Erythorbate BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Sodium Erythorbate IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products Logo

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Sodium Erythorbate