Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Soda Lime ---- Sodium Acetate ---- Sodium Adipate ---- Sodium Alginate ---- Sodium Ascorbate ---- Sodium Benzoate ---- Sodium Bicarbonate ---- Sodium Bisulfate ---- Sodium Borate, Borax ---- Sodium Bromate ---- Sodium Bromide ---- Sodium Butyl Paraben ---- Sodium Butyrate ---- Sodium Caprylate ---- Sodium Chloride ---- Sodium Citrate ---- Sodium Diacetate ---- Sodium Erythorbate -- Sodium Ethyl Paraben ---- Sodium Formate ---- Sodium Gluconate ---- Sodium Glycerophosphate ---- Sodium Formaldehyde Bisulfite ---- Sodium Hyaluronate ---- Sodium Hydroxide ---- Sodium Lactate ---- Sodium Lactobionate ---- Sodium Lauryl Sulfate ---- Sodium Methyl Paraben ---- Sodium Metabisulfite ---- Sodium Molybdate ---- Sodium Nitrate ---- Sodium Nitrite ---- Sodium Oleate ---- Sodium Perborate ---- Sodium Persulfate ---- Sodium Phosphate Monobasic ---- Sodium Phosphate Dibasic ---- Sodium Phosphate Tribasic ---- Sodium Picosulfate ---- Sodium Propyl Paraben ---- Sodium Propionate ---- Sodium Saccharin ---- Sodium Selenate ---- Sodium Selenite ---- Sodium Stibogluconate ---- Sodium Sulfate ---- Sodium Sulfide Nonahydrate ---- Sodium Tartrate ---- Sodium Thiosulfate ---- Benzyl Benzoate ---- Selenious Acid Manufacturer & Exporter

Sodium Methyl Paraben Specifications of Commercial Pure & BP Ph Eur USP NF Grade Manufacturers & Exporters Please check Specifications of Sodium Methylparaben or Sodium Methyl Hydroxybenzoate or Sodium Methylparaben or Sodium Methyl Hydroxybenzoate or Sodium Methyl Paraben USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Sodium Methylparaben or Sodium Methyl Hydroxybenzoate or Sodium Methyl Paraben CAS Number 5026-62-0 Specifications of Methylparaben Sodium USP NF Grade Methylparaben Sodium contains not less than 98.5 percent and not more than 101.5 percent of C8H7NaO3, calculated on the anhydrous basis. Completeness of solution: One g of it, dissolved in water, meets the requirement. Identification: A: Dissolve 0.5 g in 5 mL of water, acidify with hydrochloric acid, and filter the resulting precipitate. Wash the precipitate with water, and dry it over silica gel for 5 hours: the IR absorption spectrum of a mineral oil dispersion of it exhibits maxima only at the same wavelengths as that of a similar preparation of USP Methylparaben. B: Ignite about 0.3 g, cool, and dissolve the residue in about 3 mL of 3 N hydrochloric acid. A platinum wire dipped in this solution imparts an intense, persistent yellow color to a nonluminous flame. pH: between 9.5 and 10.5, in a solution (1 in 1000). Water: not more than 5.0%. Chloride: A 0.2-g portion shows no more chloride than corresponds to 0.10 mL of 0.020 N hydrochloric acid (0.035%). Sulfate: A 0.25-g portion shows no more sulfate than corresponds to 0.30 mL of 0.020 N sulfuric acid (0.12%). Specifications of Sodium Methyl Hydroxybenzoate BP Grade Sodium Methylparaben Sodium Methyl Parahydroxybenzoate, Ph Eur C8H7NaO3 --- 174.1 --- CAS 5026-62-0 Action and use: Antimicrobial preservative. DEFINITION Sodium methyl parahydroxybenzoate contains not less than 99.0 per cent and not more than the equivalent of 102.0 per cent of sodium 4-(methoxycarbonyl)phenolate, calculated with reference to the anhydrous substance. CHARACTERS A white or almost white, crystalline powder, freely soluble in water, sparingly soluble in alcohol, practically insoluble in methylene chloride. IDENTIFICATION First identification A, B, E. Second identification A, C, D, E. A. Dissolve 0.5 g in 50 ml of water. Immediately add 5 ml of hydrochloric acid. Filter and wash the precipitate with water. Dry under vacuum at 80C for 2 h. The precipitate obtained melts at 125C to 128C. B. Examine the precipitate obtained in identification test A by infrared absorption spectrophotometry, comparing with the spectrum obtained with methyl parahydroxybenzoate CRS. C. Examine the chromatograms obtained in the test for related substances. The principal spot in the chromatogram obtained with test solution (b) is similar in position and size to the principal spot in the chromatogram obtained with reference solution (c). D. To about 10 mg in a test-tube add 1 ml of sodium carbonate solution, boil for 30 s and cool. Add 5 ml of aminopyrazolone solution and 1 ml of potassium ferricyanide solution and mix. An orange to red colour develops. E. To 1 ml of solution S (see Tests) add 1 ml of water. The solution gives reaction (a) of sodium. TESTS Solution S: Dissolve 5.0 g in carbon dioxide-free water prepared from distilled water and dilute to 50 ml with the same solvent. Appearance of solution: Solution S examined immediately after preparation is clear and not more intensely coloured than reference solution. pH: Dilute 1 ml of solution S to 100 ml with carbon dioxide-free water. The pH of the solution is 9.5 to 10.5. Related substances: To pass the test. Chlorides: To 10 ml of solution S, add 30 ml of water and 1 ml of nitric acid and dilute to 50 ml with water. Shake and filter. Dilute 10 ml of the filtrate to 15 ml with water. The solution complies with the limit test for chlorides (350 ppm). Prepare the standard using 14 ml of chloride standard solution (5 ppm Cl) to which 1 ml of water has been added. Sulphates: To 25 ml of solution S, add 5 ml of distilled water and 10 ml of hydrochloric acid and dilute to 50 ml with distilled water. Shake and filter. Dilute 10 ml of the filtrate to 15 ml with distilled water. The solution complies with the limit test for sulphates (300 ppm). Heavy metals: 2.0 g complies with limit test C for heavy metals (10 ppm). Prepare the standard using 2 ml of lead standard solution (10 ppm Pb). Water: Not more than 5.0 per cent, determined on 0.500 g by the semi-micro determination of water. SDS MSDS of Sodium Methylparaben or Sodium Methyl Hydroxybenzoate or Sodium Methyl Paraben BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Sodium Methylparaben or Sodium Methyl Hydroxybenzoate or Sodium Methyl Paraben IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Sodium Methylparaben or Sodium Methyl Hydroxybenzoate or Sodium Methyl Paraben